Milton CAT TH255 - Manual (Page 2)

Dimensions
All dimensions are approximate.
Load Chart and Dimensions
TH255 Telehandler
TL255
94 in. (2.38 m)
221.6 in. (6.33 m)
128 in. (3.25 m) 95.5 in. (2.41 m)
TL255
94 in. (2.38 m)
221.6 in. (6.33 m)
128 in. (3.25 m) 95.5 in. (2.41 m) 1.816 m (71.5 in) 2.286 m (90 in)
3.658 m (144 in)
279 mm
(11 in)
1.
92
m
(7
5.
6 i
n)
Dimensions
All dimensions are approximate.
Load Chart and Dimensions
For more complete information on Cat products, dealer services, and industry solutiions, visit us on the web at
www.cat.com
© 2009 Caterpillar
Printed in U.S.A.
All rights reserved.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
TH255 Telehandler
AEHQ5954-04 (11-2009)
7.3 m (24 ft)
6.1 m (20 ft)
4.9 m (16 ft)
3.7 m (12 ft)
2.4 m (8 ft)
1.2 m (4 ft)
-1.2 m (-4 ft)
3.7 m
(12 ft)
4.9 m
(16 ft)
2.4 m
(8 ft)
1.2 m
(4 ft)
0 m
(0 ft)
0 m (0 ft)
7.3 m (24 ft)
6.1 m (20 ft)
4.9 m (16 ft)
3.7 m (12 ft)
2.4 m (8 ft)
1.2 m (4 ft)
-1.2 m (-4 ft)
3.7 m
(12 ft)
4.9 m
(16 ft)
2.4 m
(8 ft)
1.2 m
(4 ft)
0 m
(0 ft)
0 m (0 ft)
C
D
E
B
A
C
D
E
B
A
TL25
5
-10 10 20 30 40 50 60 70 80
TL25
5
-10 10 20 30 40 50 60 70 80
TL255
-10 10 20 30 40 50 60 7 0 80
TL 25
5
-10 10 20 30 40 50 60 70 80
TL25
5
-10 10 20 30 40 50 60 70 80
TL255
-10 10 20 30 40 50 60 7 0 80
0°
10°
20°
30°
40°
50°
60°
70°
2,000 kg (4,400 lb
)
1,360 kg (3,000 lb
)
900 kg (2,000 lb)
816 kg (1,800 lb
)
2,500 kg
(5,500 lb)
0°
10°
20°
30°
40°
50°
60°
70°
2,000 kg (4,400 lb
)
1,360 kg (3,000 lb
)
900 kg (2,000 lb)
816 kg (1,800 lb
)
2,500 kg
(5,500 lb)
TL255
94 in. (2.38 m)
221.6 in. (6.33 m)
128 in. (3.25 m) 95.5 in. (2.41 m)
TL255
94 in. (2.38 m)
221.6 in. (6.33 m)
128 in. (3.25 m) 95.5 in. (2.41 m)
IMPORTANT
Rated lift capacities shown are with machine
equipped with carriage and pallet forks.
The machine must be level on a firm surface
with undamaged, properly inflated tires.
Machine specifications and stability are
based on rated lift capacities at specific
boom angles and boom lengths.
(If specifications are critical, the proposed
application should be discussed with your dealer.)
DO NOT exceed rated lift capacity loads, as
unstable and dangerous machine conditions
will result.
DO NOT tip the machine forward to determine
the allowable load.
Use only JLG approved attachments with
proper material handler model/attachment
load capacity charts displayed in the operator’s
cab. OSHA requires all rough terrain forklift
operators be trained according to OSHA 29
CFR 1910.178 (1).
Due to continuous product improvements,
machine specifications and/or equipment
changes may be made without prior notification.
This machine meets or exceeds ANSI/ITSDF
B56.6-2005 as originally manufactured for
intended applications.
1.816 m (71.5 in) 2.286 m (90 in)
3.658 m (144 in)
279 mm
(11 in)
1.
92
m
(7
5.
6 i
n)