Milton CAT TH407 - Manual (Page 2)

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at
www.cat.com
© 2009 Caterpillar
Printed in U.S.A.
All rights reserved.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
8.5 m (28 ft)
7.3 m (24 ft)
6.1 m (20 ft)
4.9 m (16 ft)
3.7 m (12 ft)
2.4 m (8 ft)
1.2 m (4 ft)
0 m (0 ft)
-1.2 m (-4 ft)
3.7 m
(12 ft)
4.9 m
(16 ft)
2.4 m
(8 ft)
1.2 m
(4 ft)
-1.2 m
(4 ft)
0 m
(0 ft)
3000 kg (6,600 lb) 3700 kg (8,150 lb) 2000 kg (4,400 lb) 1500 kg (3,300 lb) 2500 kg (5,500 lb)
60°
50°
40°
30°
20°
10°
0°
67.5°
1800 kg (4,000 lb)
2000 kg (4,400 lb)
8.5 m (28 ft)
7.3 m (24 ft)
6.1 m (20 ft)
4.9 m (16 ft)
3.7 m (12 ft)
2.4 m (8 ft)
1.2 m (4 ft)
0 m (0 ft)
-1.2 m (-4 ft)
3.7 m
(12 ft)
4.9 m
(16 ft)
2.4 m
(8 ft)
1.2 m
(4 ft)
-1.2 m
(4 ft)
0 m
(0 ft)
3000 kg (6,600 lb) 3700 kg (8,150 lb) 2000 kg (4,400 lb) 1500 kg (3,300 lb) 2500 kg (5,500 lb)
60°
50°
40°
30°
20°
10°
0°
67.5°
1814 kg (4,000 lb)
2000 kg (4,400 lb)
TH407 Telehandler
Dimensions
All dimensions are approximate.
Load Chart and Dimensions
2385 mm
(93.89 in)
409 mm
16.10 in
1838 mm
(72.36 in)
2400 mm(94.48 in)
4679 mm(184.21 in)
5153 mm(202.87 in)
3050 mm(120.07 in)
AEHQ5966-05 (10-2009)
IMPORTANT
Rated lift capacities shown are with machine
equipped with carriage and pallet forks. The
machine must be level on a firm surface with
undamaged, properly inflated tires. Machine
specifications and stability are based on rated
lift capacities at specific boom angles and boom
lengths. (If specifications are critical, the proposed
application should be discussed with your dealer.)
DO NOT exceed rated lift capacity loads, as unstable
and dangerous machine conditions will result.
DO NOT tip the machine forward to determine
the allowable load.
Use only JLG approved attachments with proper
material handler model/attachment load capacity
charts displayed in the operator’s cab. OSHA
requires all rough terrain forklift operators be
trained according to OSHA 29 CFR 1910.178 (1).
Due to continuous product improvements, machine
specifications and/or equipment changes may
be made without prior notification. This machine
meets or exceeds ANSI/ITSDF B56.6-2005 as
originally manufactured for intended applications.