Milton CAT 962H - Manual (Page 18)

18 962H Wheel Loader specifications
Hydraulic System
Bucket/Work Tool System - Pump 270 L/min 71 gal/min
Output
Steering System Pump Type Piston
Hydraulic Cycle Time - Raise 6.2 Seconds
Hydraulic Cycle Time - Dump 1.3 Seconds
Hydraulic Cycle Time - Lower, 2.5 Seconds
Empty, Float Down
Hydraulic Cycle Time - Total 10 Seconds
• Implement System (Standard), Piston Pump - Rated at 2,100
rpm and 1,000 psi (6900 kPa).
• Cycle time with rated payload
Brakes
Brakes Meets required
standards.
• Meet OSHA, SAE J1473 OCT90 and ISO 3450-1985 standards.
Axles
Front Fixed front
Rear Oscillating +/- 13°
Maximum Single-Wheel Rise and 470 mm 18.5 in
Fall
Tires
Tires Choose from a variety
of tires to match your
application.
• Choice of:
23.5R25, L2, VSW
23.5R25, L2, VUT D2A
23.5R25, L2, XTLA
23.5R25, L3, VMT
23.5R25, L3, XHA
23.5R25, L5, XMINE
750/65R25, L3, XLD
23.5-25, L2, SGGL
• NOTE: In certain applications (such as load and carry) the
loader’s productive capabilities might exceed the tires’
tonnes-km/h (ton-mph) capabilities. Caterpillar recommends
that you consult a tire supplier to evaluate all conditions
before selecting a tire model. The 23.5-25 size range and
other special tires are available on request.
Engine
Engine Model Cat ® C7 ACERT™
Gross Power - SAE J1995 172 kW 230 hp
Net Power - ISO 9249 158 kW 211 hp
Net Power - SAE J1349 156 kW 209 hp
Net Power - 80/1269/EEC 158 kW 211 hp
Peak Torque (Net) @ 1,400 RPM 907 N·m 669 ft-lb
Bore 110 mm 4.33 in
Stroke 127 mm 5 in
Displacement 7.2 L 439 in 3
• Caterpillar engine with ACERT™ Technology - EPA Tier III,
EU Stage III Compliant
• These ratings apply at 1,800 rpm when tested under the
specified standard conditions.
• Rating for net power advertised based on power available
when the engine is equipped with alternator, air cleaner,
muffler and on-demand hydraulic fan drive at maximum fan
speed.
Weights
Operating Weight 19 365 kg 42,700 lb
• For 3.5 m 3 (4.5 yd 3 ) general purpose bucket with BOCE
Buckets
Bucket Capacities 2.7-3.8 m 3 3.5-5.0 yd 3
Max Bucket Capacity 3.8 m 3 5 yd 3
Operating Specifications
Static Tipping Load, Full Turn 12 098 kg 26,676 lb
Breakout Force 147 kN 33,075 lb
• For 3.5 m 3 (4.5 yd 3 ) general purpose bucket with BOCE
Transmission
Forward 1 7 km/h 4.4 mph
Forward 2 13 km/h 8.1 mph
Forward 3 22.6 km/h 14.0 mph
Forward 4 38 km/h 23.6 mph
Reverse 1 7.6 km/h 4.7 mph
Reverse 2 13.9 km/h 8.6 mph
Reverse 3 24.5 km/h 15.2 mph
Reverse 4 40 km/h 24.9 mph
• Maximum travel speeds (23.5-25 tires).