Milton CAT 908H - Manual (Page 7)

7
906H, 907H, 908H Compact Wheel Loader Specifi cations
Engine
Model Cat ® C3.4
Gross Power @ 55 kW 74 hp
2,500 rpm – 906H/907H
Gross Power @
62 kW 83 hp
2,500 rpm – 908H
Net power @
52 kW 70 hp
2,500 rpm – 906H/907H
Net Power @
59 kW 79 hp
2,500 rpm – 908H
Bore
94 mm 3.7 in
Stroke 120 mm 4.7 in
Displacement 3.3 L 203 in 3
• The Cat C3.4 engine meets Tier 3 emissions
regulations.
Weights
Operating Weight – 5630 kg 12,412 lb
906H
Operating Weight – 5810 kg
12,809 lb
907H
Operating Weight – 6465 kg
14,253 lb
908H
Transmission
Travel Speed 1 7 km/h 4.3 mph
Travel Speed 2 20 km/h 12.4 mph
High Speed 35 km/h 21.7 mph
Cab
ROPS SAE J1040 MAY94,
ISO 3471-1994
FOPS SAE J/ISO 3449 APR98
Level II, ISO 3449 1992
Level II
Hydraulic System
Main relief 235 bar 3,400 psi
3rd Auxiliary Flow, 83 L/min 22 gal/min
Standard Flow
3rd Auxiliary Flow, 125 L/min 33 gal/min
High Flow
Hydraulic cycle
5 Seconds
time – lift
Hydraulic cycle
2 Seconds
time – dump
Hydraulic cycle
4 Seconds
time – lower, float
Hydraulic cycle
2.5 Seconds
time – rackback
Service Refill Capacities
Cooling System 24 L 6.3 gal
Fuel Tank – 906H 52 L 13.7 gal
Fuel Tank – 78 L 20.6 gal
907H/908H
Hydraulic system
84 L 22.2 gal
Engine Oil 10 L 2.6 gal
Buckets
Bucket Capacities – 0.75-1.2 m 3 0.98-1.6 yd 3
906H
Bucket Capacities – 0.75-1.2 m
3 0.98-1.6 yd 3
907H
Bucket Capacities – 0.9-1.5 m
3 1.2-2.0 yd 3
908H
Operating Specifications
906H 907H 908H
Tire Size 405/70 R18 405/70 R18 405/70 R20
Rated Bucket Capacity 0.9 m 3 1.18 yd 3 1.0 m 3 1.3 yd 3 1.1 m 3 1.4 yd 3
Hydraulic Lift Capacity 3263 kg 7,194 lb 3263 kg 7,194 lb 3569 kg 7,868 lb
Breakout force 42 kN 9,442 lb 42 kN 9,442 lb 47 kN 10,566 lb
Rated operating load @ full turn, bucket 1580 kg 3,483 lb 1585 kg 3,494 lb 1705 kg 3,759 lb
Straight tipping load, bucket 3985 kg 8,785 lb 4320 kg 9,524 lb 4775 kg 10,527 lb
Full turn static tipping load, bucket 3160 kg 6,967 lb 3170 kg 6,989 lb 3410 kg 7,518 lb
Rackback, transport position 52 Degrees 52 Degrees 52 Degrees
Rated operating load @ full turn, forks 2065 kg 4,553 lb 2120 kg 4,674 lb 2355 kg 5,192 lb
(EN 474-3:2006, firm and level ground,
500 mm (20 in) load center) (80% of FTSTL)
Rated operating load @ full turn, forks
1549 kg 3,415 lb 1590 kg 3,505 lb 1766 kg 3,893 lb
(EN 474-3:2006, rough terrain,
500 mm (20 in) load center) (60% of FTSTL)
Rated operating load @ full turn, forks
2720 kg 5,997 lb 2785 kg 6,140 lb 2990 kg 6,592 lb
(EN 474-3:2006, firm and level ground,
500 mm (20 in) load center)
(transport 100 mm (4 in) above ground)
• Specifications shown are for 906H, 907H, and 908H with full fuel tank, 75 kg (165 lb) operator, ROPS/FOPS cab, skid steer loader style coupler
and general purpose bucket.