Altronix AT4B Installation Instructions - Manual (Page 4)

Keyboard Layout:
Keyboard Description:
Key Function/Description
1 Selects Sundays, Relay Off or numeral one (1)
2 Selects Monday, Relay On or numeral two (2)
3 Selects Tuesday, Relay Disable or numeral three (3)
4 Selects Wednesday, Relay Pulse or numeral four (4)
5 Selects Thursday or numeral five (5)
6 Selects Friday or numeral six (6)
7 Selects Saturday or numeral seven (7)
8 Selects Holiday Event or numeral 8
9 Clears entire programmed memory or selects numeral 9
0 Selects numeral 0
Up/Down Scrolling keys for programming
Escape/Time Backspaces cursor when in programming mode, enables clock set mode,
exit all program modes.
Program Enables event programming.
Holiday/Yes Enables holiday event selection. Confirms request to clear all
previously programmed events.
Enter Advances cursor when in programming mode.
Note: Most keys are multi-functional and will be used to input different information depending
on the mode AT4/AT4B is in.
UP and DOWN keys can be used to select data entries. After scrolling to the correct entry, depress
ENTER to accept.
Programming Instructions:
A. Setting Clock/Calendar:
Upon initial power up SET CLOCK NOW!
01/01/98 SU 00:00 DS
Enter today’s date, present day of the week, current time (24 hr. military format) by depressing number keys.
Note: The flashing cursor denotes location of data entry selection to be made. If an entry was made in error
or requires changing, depress either ESCAPE to backspace, or ENTER to accept data and advance the cursor.
Now select either DS (daylight savings mode) by depressing DOWN or ST (standard time mode) by
depressing UP followed by ENTER.
will appear in display.
- 4 -