Altronix ALTV2416CB Installation Instructions - Manual (Page 2)

- 2 - ALTV2416series
Overview:
These Altronix CCTV Power Supplies provide 24VAC/28VAC distributed via sixteen (16) fuse or PTC protected out-
puts for powering CCTV Cameras, heaters and other video accessories.
Sixteen (16) Output ALTV2416 Reference Chart:
Altronix
Model Number Output Voltage Total Output Current (Power) Number of Outputs PTC Protected Outputs Fuse Protected Outputs Output Current (max
per
output) Main Fuse Ratings on
Board
115VAC 50/60Hz Input Current
ALTV2416
24VAC 8 amp
16 - x 3.5 amp (2) 5 amp/250V 1.9 amp
28VAC 7 amp
ALTV2416CB
24VAC 8 amp
16 x - 2.5 amp (2) 5 amp/250V 1.9 amp
28VAC 7 amp
ALTV2416350
24VAC 14 amp
16 - x 3.5 amp (2) 5 amp/32V 2.7 amp
28VAC 12.5 amp
ALTV2416350CB
24VAC 14 amp
16 x - 2.5 amp (2) 5 amp/32V 2.7 amp
28VAC 12.5 amp
ALTV2416300M
24VAC 12.5 amp
16 - x 3.5 amp - 2.7 amp
28VAC 10 amp
ALTV2416300CBM
24VAC 12.5 amp
16 x - 2.5 amp - 2.7 amp
28VAC 10 amp
ALTV2416600
24VAC 28 amp
16 - x 3.5 amp (2) 5 amp/250V 5.4 amp
28VAC 25 amp
ALTV2416600CB
24VAC 28 amp
16 x - 2.5 amp (2) 5 amp/250V 5.4 amp
28VAC 25 amp
Specifications:
Installation Instructions:
1. Mount unit in desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the
enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure’s
upper keyholes over the two upper screws, level and secure. Mark the position of the lower two holes. Remove the
enclosure. Drill the lower holes and install the three fasteners. Place the enclosure’s upper keyholes over the two
upper screws. Install the two lower screws and make sure to tighten all screws (Enclosure Dimensions, pg. 7,8).
Secure enclosure to earth ground.
2. Slide switch on PD board to OFF position for models ALTV2416 and ALTV2416CB (Fig. 1, pg. 4).
Turn OFF main switch on all other models (Figs. 2-4, pgs. 4-6).
3. All units are factory set for 24VAC operation.
• Surge suppression.
• AC power LED indicator.
• Power ON/OFF switch (ALTV2416 and ALTV2416CB).
• Illuminated power disconnect circuit breaker with
manual reset for all other models.
• Unit maintains camera synchronization.
• Ease of installation saves time & eliminates costly labor.
• Spare fuses included (on fuse protected models). Enclosure Dimensions:
ALTV2416 and ALTV2416CB: 8.5”H x 7.5”W x 3.5”D
ALTV2416300M and ALTV2416300CBM:
8.5”H x 7.5”W x 3.75”D
ALTV2416350, ALTV2416350CB, ALTV2416600
and ALTV2416600CB: 13.5”H x 13”W x 3.25”D