Altronix RBOC7 Installation Instructions User Manual
Rboc7 - open collector multiple relay module, Specifications, Installation instructions

RBOC7 - Open Collector Multiple Relay Module
Specifications:
• 12VDC or 24VDC selectable operation.
• Seven (7) independent (3VDC to 24VDC @ 2mA
minimum) positive inputs.
• Seven (7) open collector outputs capable of
sinking 100mA each.
Board dimensions: 6.5"L x 3.25"W x 1"H
Installation Instructions:
1. Mount unit in desired location/enclosure.
2. Connect positive trip outputs to desired trigger
inputs. INP1 to INP7 activate outputs on positive
trip signal of 3VDC to 24VDC @ 2mA.
3. Open collector outputs are marked “OC”.
Open collector output specs:
Sink current: 100mA.
Maximum output voltage: 50VDC.
INP5
INP6
INP7
GND POS+
INP1
INP2
INP3 INP4
GND
MULTIPLE RELAY MODULE
ALTRONIX CORP.
BROOKLYN, NY 11220
RBOC7
NO
C
NO
C
NO
C
NO
C
NO
C
NO
C
NO
C
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IIRBOC7 - Rev. 103101
MEMBER