Altronix HubWay EXP UTP Power Injector Data Sheet - Manual

HubWayEXP UTP Power Injector supplies power combined with pass through
video and data for up to 16 cameras from Altronix HubWay Active UTP
Transceiver Hubs. Unit allows for video transmission of up to 16 cameras
over four CAT-5 or higher structured cables from HubWay Active Transceiver
Hubs. The HubWayEXP units are designed for installation at the IDF
(Intermediate Distribution Frame) or MDF (Main Distribution Frame).
HubWayEXP UTP Power Injector
Rev. DSHubWayEXP - 10262012
Overview
Specifications
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals
HubWayEXP
Input:
• 115VAC 60Hz, 2.5 amp or 230VAC 50Hz, 1.5 amp.
Video:
• Sixteen (16) channels of video over twisted pair
up to a distance of 5000 ft. (1524m) per channel.
• Sixteen (16) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Unit provides up to 1 amp max. per channel.
• Individually selectable 24VAC or 28VAC isolated
power outputs with OFF position.
• Individual electronically isolated PTC outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• Total system power consumption: 450 W.
• 171 BTU/Hr.
• System AC input VA requirement: 450VA.
Features:
• Sixteen (16) power LEDs.
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
Accessories:
• HubWay Active Transceiver Hubs:
-
HubWayEX16S - 16 channel Active Transceiver
Hub. Transmits video up to 5000 ft.
-
HubWayEX16 - 16 channel Active Transceiver
Hub. Transmits video up to 5000 ft.
-
HubWayEX32 - 32 channel Active Transceiver
Hub. Transmits video up to 5000 ft.
Mechanical:
• Units can be rack, wall or shelf mounted.
• Modular 1U standard EIA 19” rack mount chassis.
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 19.125” (486mm)
x 8.5” (216mm)
• Product weight (approx.): 19.8 lbs. (8.98 kg).
• Shipping weight (approx.): 22.15 lbs. (10.05 kg).