Altronix HubWay 8D Data Sheet - Manual

HubWay8D Passive UTP Transceiver Hub w/Integral Camera Power transmits
UTP video, RS422/RS485 data and power over a single CAT-5 or higher struc-
tured cable. Unit provides 8 camera channels in a space saving 1U EIA 19” rack
mount chassis which may be rack, wall or shelf mounted. Video transmission
range is up to 750 ft. max. per channel. Units are compatible with AC and/or
DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or
HubWayDvi Video Balun/Combiners. In addition, the unit features individually
selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An
optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power
can be used as an accessory module to transmit video from up to 4 cameras over a
single CAT-5 or higher structured cable back to the HubWay8D. In addition, the
HubSat4D provides power to these cameras locally to eliminate the possibility of
voltage drop associated with long cable runs.
HubWay8D - Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWay8D - 10262012
Overview
Specifications
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals
Input:
• 115VAC 60Hz, 1.5 amp or 230VAC 50Hz, 1 amp.
Video:
• Eight (8) channels of video over twisted pair
up to a distance of 750 ft. (228.6m) per channel.
• Eight (8) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Unit provides up to 1 amp max. per channel not to
exceed a total of 5 amp (150VA) maximum current.
• Individually selectable 24VAC or 28VAC isolated
power outputs with OFF position.
• Class 2 Rated power limited outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• Total system power consumption: 150 W.
• 57 BTU/Hr.
• System AC input VA requirement: 150VA.
Features:
• Eight (8) power LEDs.
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
-
HubWayAv2 Slim-line - compatible with all
HubWay UTP Hubs for AC or DC fixed cameras
or
PTZs.
- HubWayDv - compatible with all HubWay
UTP Hubs for DC fixed cameras or PTZs.
-
HubWayDvi - built-in isolation. Compatible with
all HubWay UTP Hubs for DC fixed cameras
or
PTZs.
Mechanical:
• Units can be rack, wall or shelf mounted.
• Modular 1U standard EIA 19” rack mount chassis.
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 19.125” (486mm)
x 8.5” (216mm)
• Product weight (approx.): 11.0 lbs. (4.99 kg).
• Shipping weight (approx.): 12.3 lbs. (5.58 kg).
HubWay8D