beautypg.com

Altronix HubWay LD8Di Data Sheet User Manual

Hubway

background image

Altronix HubWayLD8Di Active UTP Transceiver
Hub w/Integral Isolated Camera Power transmits
UTP video, RS422/RS485 data and power
over a single CAT-5 or higher structured
cable. Unit provides 8 camera channels in a
space saving 1U EIA 19” rack mount chassis
which may be rack, wall or shelf mounted. Video transmission range is up to
3000 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit features individually selec-
table 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4D Passive UTP
Transceiver Hub with Integral Isolated Camera Power can be used as an accessory module to transmit video from up
to 4 cameras over a single CAT-5 or higher structured cable back to the HubWayLD8Di. In addition, the HubSat4D
provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Input:

• 115VAC 60Hz, 2.5 amp

or 230VAC 50/60Hz, 1.5 amp.

• Primary fuse (internal) is rated at 5 amp/250V.

Video:

• Eight (8) channels of video over twisted pair

up to a distance of 3000 ft. per channel.

• Eight (8) 75 ohm video outputs.

Data:

RS422/RS485 data inputs.

Power:

• Individually selectable 24VAC or 28VAC power

outputs with OFF position.

• Electronically isolated camera power.
• PTC protected outputs rated @ 1 amp per channel.
• Class 2 Rated power limited outputs.
• Unit provides up to 1 amp max. per channel not to

exceed a total of 8 amp maximum current.

• Surge suppression.

Visual Indicators:

• AC input power indicator.
• Video signal and power LED indicators.

Features:

• Picture and Gain control.
• Illuminated master power disconnect circuit breaker

with manual reset.

• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.

Accessories:

• Optional HubSat4D allows transmission of up to

four (4) video signals over a single CAT-5 or higher
structured cable.

• Video Balun/Combiners:

- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC

cameras without isolation.

Shipping Weight (approximate):

- HubWayLD8Di: 13.5 lbs.
- HubWayLD82Di: 14.7 lbs.
- HubWayLD83Di: 14.2 lbs.

HubWayLD8Di

Active UTP Transceiver Hub with Integral Isolated
Camera Power. Video Balun/Combiners not included.
HubWayLD82Di

Active UTP Transceiver Hub with Integral Isolated
Camera Power with eight (8) HubWayAv Video
Balun/Combiners.

HubWayLD83Di

Active UTP Transceiver Hub with Integral Isolated
Camera Power with eight (8) HubWayDv Video
Balun/Combiners.

HubWay

®

LD8Di Active UTP Transceiver Hub

with Integral Isolated Camera Power

Rev. DSHubWayLD8Di - E20I

Overview

Specifications

Models

Agency Approvals

UL Listed for Commercial CCTV Equipment
(UL 2044).

CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.