Altronix HubWay EX1 Data Sheet - Manual

HubWayEX1 Active UTP Transceiver Module employs automatic gain
control (AGC) to transmit UTP video and RS422/RS485 data over a single
CAT-5 or higher structured cable.
Unit provides a single camera channel in a compact insulated housing.
Video transmission range is up to one (1) mile max.
HubWayEX1 - Active UTP Transceiver Module
Rev. DSHubWayEX1 - 10262012
Overview
Specifications
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals
Video output
to head end
equipment
(DVR).
Spring terminal block
for RS422/RS485 input
from head end equipment
(DVR) for PTZ control.
CAT-5 or higher structured
cable to Video/Balun Combiner
at camera.
UL Listed
Class 2
power supply
or Class 2
transformer
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Drawing
Input:
• 16VAC-24VAC or 12VDC-24VDC, 1W.
These products shall only be powered by a UL Listed
Class 2 power Supply or Class 2 transformer.
Video:
• One (1) channel of video over twisted pair
up to a distance of 5000 ft. per channel.
• Active balun combiners not required.
• One (1) 75 ohm video output.
Data:
• RS422/RS485 data inputs.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• Total system power consumption: 40 W.
Electrical (cont’d):
• 15 BTU/Hr.
• System AC input VA requirement: 40VA.
Features:
• Picture and Gain control.
• Automatic correction for reverse video polarity.
• One (1) video signal LED.
Mechanical:
• Dimensions (W x L x H approx.):
2.5” (63.5mm) x 3.8” (96.52mm) x 1” (25.4mm)
• Product weight (approx.): 0.2 lbs. (0.091 kg).
• Shipping weight (approx.): 0.3 lbs. (0.136 kg).
HubWayEX1