Altronix VR5T Installation Instructions - Manual (Page 2)

Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
web site: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IIVRseries - Rev. 070709
G26M MEMBER
Removable
Terminal Block
24VDC
+ Input --
12VDC
+ Output --
24VDC Input to
12VDC Output @ 2 amp max.
altronix.com
Made in U.S.A.
Voltage Regulator
VR3T
12VDC Output
Power
LED
24VDC
Input
Fig. 5
24VDC
+ Input --
12VDC
+ Output --
24VDC Input to
12VDC Output @ 3 amp max.
altronix.com
Made in U.S.A.
Voltage Regulator
VR4T
Removable
Terminal Block
12VDC Output
Power
LED
24VDC
Input
Fig. 6
VR5T
Voltage Regulator
24VAC/24VDC Input to
12VDC Output @ 3 amp max.
INPUT POWER --- OUT +
altronix.com Made in U.S.A.
12VDC Output
24VAC/VDC
Input
Power
LED
Fig. 7
VR5BT
Voltage Regulator
w/Battery Charging
24VAC/24VDC Input to
12VDC Output @ 3 amp max.
INPUT POWER --- OUT + --- BAT +
altronix.com Made in U.S.A.
12VDC Output
Battery
Charging
24VAC/VDC
Input
Power
LED
Fig. 8
Installing VR3T, VR4T (Figs. 5-6, pg. 2):
1. Mount unit in proximity to the device. Affix one side of
velcro (supplied) to the unit and place the second side of the
velcro in the desired location.
2. Connect 24VDC source* to the terminals
marked [24VDC + Input --- ].
3. Measure output voltage and check polarity before connecting
devices, in order to avoid potential damage.
4. Connect device to be powered to the terminals marked
[--- Output +].
5. LED will illuminate when power is present.
*For CE compliance use a Class 2 Power-Limited
Power Source.
Installing VR5T, VR5BT (Figs. 7-8, pg. 2):
1. Mount unit in proximity to the device. Use a proper fastener
and/or wall anchor when securing unit to the wall.
2. Connect 24VAC transformer or 24VDC source* to the
terminals marked [Input].
3. Measure output voltage and check polarity before connecting
devices, in order to avoid potential damage.
4. Connect device to be powered to the terminals
marked [--- OUT + ].
5. LED will illuminate when power is present.
6. For VR5BT (Fig. 8, pg. 2) - when the use of stand-by
batteries is desired, they must be lead acid or gel type.
Connect battery to terminals marked [--- BAT +].
*For CE compliance use a Class 2 Power Limited
Power Source.
Installing VR1T, VR1TM5, VR2T (Figs. 2-4, pg. 2):
1. Mount unit in proximity to the device. Affix one side of velcro (supplied) to unit and place the second side of the velcro
in the desired location.
2. Connect 24VAC transformer or 24VDC source* to the terminals marked [24VDC/24VAC Input].
3. Measure output voltage and
check polarity before
connecting devices, in order
to avoid potential damage.
4. Connect device to be
powered to the terminals marked
[+ Output --- ].
5. LED will illuminate when
power is present.
*For CE compliance use a
Class 2 Power-Limited
Power Source.
24VDC/24VAC
Input
12VDC
+ Output --
12VDC Output
Power
LED
24VAC/VDC
Input
24VAC/24VDC Input to
12VDC Output @ 1 amp max.
altronix.com
Made in U.S.A.
Voltage Regulator
VR1T
Fig. 2
24VDC/24VAC
Input
12VDC
+ Output --
24VAC/24VDC Input to
5VDC Output @ 1 amp max.
altronix.com
Made in U.S.A.
Voltage Regulator
VR1TM5
12VDC Output
Power
LED
24VAC/VDC
Input
Fig. 3
24VDC/24VAC
Input
12VDC
+ Output --
24VAC/24VDC Input to
12VDC Output @ 0.5 amp max.
altronix.com
Made in U.S.A.
Voltage Regulator
VR2T
12VDC Output
Power
LED
24VAC/VDC
Input
Fig. 4