MAXWELL MW-3016 W - Manual (Page 3)

ENGLISH
3
STEAM IRON MW-3016
Description
1. Water spray nozzle
2. Water tank lid
3. Constant steam supply control
4. Self-clean mode button
5. Water spray button
6. Additional steam release button
7. Heating element on/off indicator
8. Handle
9. Power cord protection
10. Temperature control
11. Iron base
12. Water reservoir
13. «MAX» indication for maximal water level
14. Iron sole
15. Measuring cup
SAFETY MEASURES
Before using the device, read this instruction
carefully and keep it for future reference.
• Before switching on the device, make sure
that your home electricity supply corresponds
to the operating voltage of the iron.
• The power cord is equipped with a euro plug;
insert it into the socket with a secure grounding.
• In order to avoid fire risk, do not use adapters
when connecting the device to the socket.
• In order to avoid mains overloading, provide
that no other electrical appliances with higher
power consumption are connected to the
same outlet the device is connected to.
• Do not use the device if the plug or the power
cord is damaged or if there are other dam-
ages in the device.
• Use the device only for the intended purpos-
es, as stated in the instruction.
• Place the iron on a flat stable surface or use
the ironing board.
• Never leave the operating iron unattended.
• When filling the water tank with water, always
unplug the device.
• The water tank lid should be closed during the
ironing.
• Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemical agents etc.
• Avoid contact with hot surfaces or outgoing
steam of the iron in order to avoid getting
burns.
• Provide that the power cord is not hanging
over the edge of the ironing board and make
sure that it does not touch hot surfaces.
• Before plugging/unplugging the iron to the
mains, set the temperature control to the
“MIN” position, and the constant steam sup-
ply control to the “
” position (constant
steam supply is off).
• Always unplug the iron if it is not being used.
• To unplug the iron always take its plug, do not
pull the power cord.
• In order to avoid electric shock do not im-
merse the device into water or other liquids.
• Before taking the iron away for keeping, let
the device cool down and pour out the re-
maining water.
• Pour out water only after unplugging the de-
vice.
• Do not use the device after it fell, if there are
visible damages in the device or in case of
leakage.
• In order to avoid electric shock do not repair
the device yourself. If there are some dam-
ages in the device apply to the authorized
service center.
• Do not allow children to use the device as a
toy.
• This device is not intended for usage by
children or disabled persons. In exceptional
cases a person who is responsible for safety
should give them all necessary instructions
on safety measures and information about
danger, which can be caused by improper us-
age of the device. Do not permit them to use
the device unattended.
• Store the iron vertically in a dry cool place out
of reach of children and disabled persons.
• The device is intended for household use
only.
Before first use
• Unpack the iron; remove the protection (if
any) from the iron sole (14).
• Make sure that the electrical supply voltage
corresponds to the iron operating voltage.
Note:
- When using the device for the first time, the
heating element of the device burns that is
why some smoke or foreign odor can appear.
It is normal.
MW-3016.indd 3 MW-3016.indd 3 05.10.2011 15:19:27 05.10.2011 15:19:27