Altronix SMP3PMCTX Data Sheet - Manual

SMP3PMCTX
Supervised Power Supply/Charger
Rev. DSSMP3PMCTX_11192012
Overview
Specifications
SMP3PMCTX
Input:
• Input 115VAC, 50/60Hz, 0.65 amp or
230VAC, 50/60Hz, 0.35 amp.
Output:
• 12VDC or 24VDC selectable output.
• 2.5 amp supply current.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Maximum charge current 0.5 amp.
• Zero voltage drop when switching over
to battery backup.
Supervision:
• AC fail supervision (form “C” contacts).
• Battery presence and low battery supervision
(form “C” contacts).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• BTU/Hr.:
- 12VDC: 15.35 BTU/Hr.
- 24VDC: 30.71 BTU/Hr.
• System AC input VA requirement:
- 115VAC: 74.75VA.
- 230VAC: 80.5VA.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
13.5” (342.9mm) x 13” (330.2mm) x 3.25” (82.55mm)
- Accommodates up to two (2) 12VDC/7AH batteries.
• Product weight (approx.): 7.1 lbs. (3.22 kg).
• Shipping weight (approx.): 8.0 lbs. (3.63 kg).
SMP3PMCTX supervised power supply/charger will convert a 115VAC/230VAC,
50/60Hz input, into a regulated 12VDC or 24VDC output @ 2.5 amp continuous
supply current.