Altronix HubWay LD16CD Data Sheet - Manual

HubWayLD16CD Active UTP Transceiver Hub w/Integral Camera Power
transmits UTP video, RS422/RS485 data and power over a single CAT-5 or
higher structured cable. Unit provides 16 camera channels in a space saving 1U
EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video
transmission range is up to 3000 ft. max. per channel. Units are compatible
with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv,
HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit
features individually selectable 24VAC or 28VAC PTC protected outputs with
surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with
Integral Camera Power can be used as an accessory module to transmit video
from up to 4 cameras over a single CAT-5 or higher structured cable back to the
HubWayLD16CD. In addition, the HubSat4D provides power to these cameras
locally to eliminate the possibility of voltage drop associated with long cable runs.
HubWay ® LD16CD Active UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWayLD16CD - 10312012
Overview
Specifications
Agency Approvals
UL Listed for Commercial CCTV Equipment
(UL 2044). CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.
Input:
• 115VAC 50/60Hz, 1.5 amp.
• Primary fuse (internal) is rated at 5 amp/250V.
Video:
• Sixteen (16) channels of video over twisted pair
up to a distance of 3000 ft. (914.4m) per channel.
• Sixteen (16) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 10 amp (300VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC protected outputs are rated @ 1 amp
per channel.
• Surge suppression.
Visual Indicators:
• AC input power indicator.
• Video signal and power LED indicators.
Features:
• Picture and Gain control.
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.
Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
- HubWayAv2 - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Mechanical:
• Modular 1U standard EIA 19” rack mount chassis
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 19.125” (486mm)
x
2.498” (63.45mm)
• Shipping Weight (approximate):
- HubWayLD16CD: 22.5 lbs. (10.21kg)
- HubWayLD82CD: 23.55 lbs. (10.68kg)
- HubWayLD83CD: 24.55 lbs. (11.14kg)
HubWayLD16CD