Altronix SMP7PMP8 Data Sheet - Manual

Input:
• Input 115VAC, 60Hz, 1.45 amp.
Output:
• 12VDC or 24VDC selectable output.
• 6 amp supply current.
• Eight (8) fuse protected outputs.
• Outputs are rated @ 3.5 amp.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Maximum charge current 0.7 amp.
• Zero voltage drop when switching over
to battery backup.
Supervision:
• AC fail supervision (form “C” contacts).
Supervision (cont’d):
• Battery presence and low battery supervision
(form “C” contacts).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• BTU/Hr.:
- 12VDC: 36.85 BTU/Hr.
- 24VDC: 73.70 BTU/Hr.
• System AC input VA requirement: 166.75VA.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
13.5” (342.9mm) x 13” (330.2mm) x 3.25” (82.55mm)
- Accommodates up to two (2) 12VDC/7AH batteries.
• Product weight (approx.): 8.3 lbs. (3.76 kg).
• Shipping weight (approx.): 9.3 lbs. (4.22 kg).
Overview
Specifications
SMP7PMP8
SMP7PMP8 is a multi-output power supply/charger that converts a 115VAC/60Hz
input into eight (8) 12VDC or 24VDC outputs.
SMP7PMP8
Multi-Output Power Supply/Charger
Rev. DSSMP7PMP8 - 11192012