Altronix AL624E Data Sheet - Manual

AL624E power supply/charger converts a low voltage AC input into 6VDC, 12VDC or
24VDC output (see specifications). This general purpose power supply has a wide
range of applications for access control, security and CCTV system accessories that
require additional power.
AL624E
Linear Power Supply/Charger with Enclosure
Rev. DSAL624E_11142012
Overview
Specifications
AL624E
Input:
• 16VAC to 24VAC, 20VA to 40VA.
Output:
• Switch selectable 6VDC-12VDC-24VDC.
• 6VDC or 12VDC @ 1.2 amp supply current
or 24VDC @ 0.75 amp supply current.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.3 amp.
• PTC battery protection.
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: --- 20º C to 49º C ambient.
• BTU/Hr.:
- 6VDC: 3.69 BTU/Hr.
- 12VDC: 7.37 BTU/Hr.
- 24VDC: 9.21 BTU/Hr.
• System AC input VA requirement:
- 16.5VAC/20VA: 138. 16.5VAC/40VA: 276.
- 24VAC/20VA: 92.
24VAC/40VA: 192.05.
Features:
• Power supply/charger with enclosure.
• Fits one (1) 12VDC/7AH or
two (2) 12VDC/4AH batteries.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
8.5” (215.9mm) x 7.5” (190.5mm) x 3.5” (88.9mm)
• Product weight (approx.): 4.05 lbs. (1.84 kg).
• Shipping weight (approx.): 5.05 lbs. (2.29 kg).