Altronix SMP3PM Data Sheet - Manual

Input:
• 12VDC applications use TP1640, T2428100.
• 24VDC applications use T2428100.
Output:
• 12VDC or 24VDC selectable output.
• 2.5 amp continuous supply current.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.3 amp.
• Battery short circuit protection (circuit breaker).
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: --- 20º C to 49º C ambient.
• BTU/Hr.:
- 12VDC: 15.35 BTU/Hr.
- 24VDC: 30.71 BTU/Hr.
• System AC input VA requirement:
12VDC: 55.2VA.
24VDC: 115VA.
Features:
• Includes battery leads.
Mechanical:
• Board Dimensions (L x W x H approx.):
4.05” (102.87mm) x 7” (177.8mm) x 1.35” (34.29mm)
• Product weight (approx.): 0.4 lbs. (0.18 kg).
• Shipping weight (approx.): 0.5 lbs. (0.23 kg).
SMP3PM supervised power supply/charger converts a low voltage AC input into
a 12VDC or 24VDC output. This unit has a wide range of applications for access
control, security and CCTV system accessories that require additional power.
SMP3PM
Supervised Power Supply/Charger
Rev. DSSMP3PM_11192012
Overview
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
7.0”
(177.8mm)
0.146”
(3.71mm)
0.159”
(4.0386mm)
3.756”
(95.40mm)
6.721”
(170.713mm)
4.05”
(102.87mm)
Ø 0.151”
(3.84mm)
SMP3PM
Board Dimensions (L x W x H) (approximate) :
4.05” (102.87mm) x 7” (177.8mm) x 1.35” (34.29mm)