Altronix HubSat 4WP Data Sheet - Manual

Altronix HubSat4WP Outdoor Passive UTP Transceiver Hub w/Integral Camera
Power transmits UTP video, RS422/RS485 data and power over a single CAT-5
or higher structured cable. Unit provides 4 camera channels in a wall mount
enclosure. Video transmission range is up to 750 ft. max. per channel. Units are
compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features
24VAC or 28VAC PTC protected outputs and surge suppression. Optionally, the
HubSat4WP can be used as an accessory module to transmit video from up to
4 cameras over a single CAT-5 or higher structured cable back to the HubWay,
HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addi-
tion, the HubSat4WP powers these cameras locally to eliminate the possibility of
voltage drop associated with long cable runs.
HubSat4WP - Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubSat4WP - 11142012
Overview
Specifications
Agency Approvals
CE Approved.
Input:
• 115VAC 50/60Hz, 1.5 amp.
• Primary fuse (internal) is rated at 3.5 amp/250V.
Output:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 8 amp (100VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC protected outputs are rated @ 1 amp
per channel.
• Surge suppression.
Video:
• Four (4) channels of video over twisted pair
up to a distance of 750 ft. (228.6m) per channel.
• Four (4) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Visual Indicators:
• Four (4) individual power LED indicators.
Accessories:
• Video Balun/Combiners:
- HubWayAv2 - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
812” (304.8mm) x 8” (203.2mm) x 6” (152.4mm)
• Product weight: 13.75 lbs. (6.24 kg).
• Shipping weight: 14.1 lbs. (6.4 kg).
Video Balun/Combiners
Video from Camera
Data to Camera
Power to Camera
Cat5
back to
HubWay
or
HubSat
HubWayAv2 - Slim-line Video Balun/Combiner
compatible with all HubWay UTP Hubs
for AC or DC fixed cameras or PTZs.
Refer to the HubWay Video Balun/Combiner
Installation Guide Rev. 123008
12VDC
-- + RJ45
DATA
+ --
VIDEO Commercial
CCTV Accessory
3C03
HubWayDv
VIDEO BALUN/COMBINER
Wire
Connectors
Red
Power LED
+ 12VDC Power
--- to Camera
--- Data
+ to Camera
To BNC
Connector
of Camera
Structured
Cable from
HubWayH16
RJ45 Jack
HubWayDv - Video Balun/Combiner
compatible with all HubWay UTP Hubs for DC
fixed cameras or PTZs.
HubWayDvi - Video Balun/Combiner
built-in isolation. Compatible with all HubWay
UTP Hubs for DC fixed cameras or PTZs. With
or without internal isolation.