Altronix eBridge4SK Data Sheet User Manual
Altronix Accessories for electrical

The eBridge4SK kit consists of an eBridge1SPR and eBridge4SPT which are
Coax to CAT-5 Ethernet adapters/media converters that deliver data and power
over coax cable. The paired set enables fast 10/100 Base-T Ethernet digital
communication. eBridge4SPT allows you to upgrade your existing infrastruc-
ture by replacing a single analog device with up to four (4) PoE/PoE+ devices.
eBridge1SPR passes data and sends power over the coax to the eBridge4SPT.
Data transmission and power over the Coax is possible up to 1500 ft. Maximum
range from head end to the PoE camera/device is 610m (2000 ft.) taking into
consideration that up to 100m (328 ft.) of structured cable may be deployed
at each end. Built-in IP management allows for remote camera reset, monitor-
ing and reporting via various IP protocols. eBridge4SK enables cost-effective
system upgrades and eliminates the costs and labor associated with installing
new network cabling.
eBridge4SK - EoC Receiver and
PoE/PoE+ EoC Transceiver Switch
Rev. DSeBridge4SK_09052013
Specifications
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
Overview
European Conformity
* sloc is a registered trademark of Intersil Corporation.
Compliant:
• Incorporates sloc
TM
(Security Link over Coax)
technology*.
Input:
• eBridge1SPR - 51-56VDC/100W @ max. power.
eBridge4SPT - powered by eBridge1SPR.
Power Output:
• eBridge4SPT: 4 ports PoE+ (30W) per port.
• Total output power: 95W.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair Cat-5 or better structured cable.
• Distance: up to 328 ft. (100m).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
Coax:
• Distance: up to 1,500 ft.
• Connectivity: BNC, RG-59/U or similar.
• Throughput is rated to pass 25mbps from camera to
receiver. Data distances of up to 1500 ft. can be
achieved with the proper headend equipment,
multiple Megapixel cameras can be used.
LED Indicators:
• Blue LED - Coax link connection.
• Green LED - Power (eBridge1SPR only).
• Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
Environmental:
• Operating Temperature: 14ºF to 122ºF (-10ºC to +50ºC).
• Storage Temperature: -22º to 158ºF (- 30º to +70ºC).
• Humidity: 20 to 85%, non-condensing.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation (up to four (4) IP cameras expansion
per analog camera).
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment.
• Upgrade deployed CCTV Coax to a digital network
for Retail, Casinos, Airports, Schools, Hospitals, etc.
Mechanical:
• Dimensions (H x W x D approx.):
eBridge1SPR:
4.375” x 3.5” x 1” (111.125mm x 88.89mm x 25.4mm)
eBridge4SPT:
1.7” x 5.23” x 8.93” (43.18mm x 132.84mm x 226.82mm)
eBridge4SPT
and eBridge1SPR
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
C-Tick Compliant - Z1409