VEGA WEIGHTRAC 31 Profibus PA - Manual (Page 54)

54
7 Setup with PACTware
WEIGHTRAC 31 • Profibus PA
43837-EN-131119
Basic settings: Restores the parameter settings at the time of ship-
ment Ex factory including the order-specific settings. The measured
value memory is deleted.
Factory settings: Resets parameter settings including special
parameters to the default values of the respective instrument. The
measured value memory and the order-specific settings are deleted.
Peak values: Resets the parameter settings in the menu item "Setup"
to the default values of the respective instrument. Order-specific
settings remain but are not taken over into the current parameters.
The measured value memory as well as the event memory remain
unaffected.
The following table shows the default values of the instrument. The
values apply for the application "Mass flow". The application must be
selected first.
Depending on the instrument version, not all menu items may be
available or they may be differently assigned:
Setup
Menu item Default value Modified value
Sensor address 126
Measurement loop name Sensor
Isotope
Cs-137
Application Mass flow
Unit - Belt/screw speed m/s
Speed
1 m/s
Background radiation 0 ct/s
Unit of the process value t/h
Adjustment max.
Max. process value:
999 t/h
Adjustment min. Min. process value: 0 t/h
Actual zero rate 90000
Linearization -
AI FB 1 Tag Descriptor -
AI FB 1 Channel Process value
AI FB 1 scaling 0 t/h = 0 %
100 t/h = 100 %
AI FB 1 Lin. Type Linear
AI FB 1 Out Scale Unit %
AI FB 1 Out Scale Deci-
mal Point
#.##
AI FB 1 damping 0 s