VEGA VEGAFLEX 82 Modbus and Levelmaster protocol - Manual (Page 5)

5
Contents
VEGAFLEX 82 • Modbus and Levelmaster protocol
41833-EN-130314
Contents
1 About this document
1.1 Function ............................................................................. 7
1.2 Target group ....................................................................... 7
1.3 Symbolism used ................................................................. 7
2 For your safety
2.1 Authorised personnel ......................................................... 8
2.2 Appropriate use .................................................................. 8
2.3 Warning about incorrect use ............................................... 8
2.4 General safety instructions ................................................. 8
2.5 CE conformity ..................................................................... 8
2.6 NAMUR recommendations ................................................ 9
2.7 Environmental instructions ................................................. 9
3 Product description
3.1 Configuration .................................................................... 10
3.2 Principle of operation ........................................................ 11
3.3 Packaging, transport and storage ..................................... 12
3.4 Accessories and replacement parts ................................. 12
4 Mounting
4.1 General instructions ......................................................... 15
4.2 Instructions for installation ................................................ 15
5 Connecting to power supply and bus system
5.1 Preparing the connection ................................................. 20
5.2 Connection ....................................................................... 21
5.3 Wiring plan ....................................................................... 22
5.4 Switch-on phase ............................................................... 23
6 Set up with the display and adjustment module
6.1 Adjustment volume ........................................................... 24
6.2 Insert display and adjustment module .............................. 24
6.3 Adjustment system ........................................................... 25
6.4 Parameter adjustment - Quick setup ................................ 26
6.5 Parameter adjustment - Extended adjustment .................. 28
6.6 Saving the parameter adjustment data ............................. 42
7 Setting up sensor and Modbus interface with PACTware
7.1 Connect the PC ................................................................ 43
7.2 Parameter adjustment with PACTware .............................. 44
7.3 Set up with the quick setup ............................................... 45
7.4 Saving the parameter adjustment data ............................. 50
8 Set up with other systems
8.1 DD adjustment programs ................................................. 51
8.2 Communicator 375, 475 ................................................... 51
9 Diagnostics and service
9.1 Maintenance .................................................................... 52
9.2 Diagnosis memory ........................................................... 52
9.3 Status messages .............................................................. 53
9.4 Rectify faults ..................................................................... 57