Yamaha DRX-1 - Manual (Page 33)

R ECORDING 29
English
Clearing a timer block
1 Press TIMER on the remote control.
2 Select ‘Timer list’ with w/v (down/up cursor).
3 Press u (right cursor).
4 Select the Timer Recording you want to clear with w/
v (down/up cursor). The selected Timer Recording
will be highlighted in blue.
5 Press CLEAR.
➤ The Recording you selected will appear alone on
the screen.
6 Confirm with ENTER/OK.
➤ Timer Cleared will appear at the bottom of the
screen briefly. Then the Timer List will reappear.
7 Remove the menus by pressing TIMER, repeatedly if
necessary.
Note:
If Timer Recordings overlap or conflict with each other, they will
be highlighted in red in the Timer List.
How to stop a Timer Recording in progress
● A Timer Recording that is already in progress can only
be aborted by pressing POWER (B/I) on the
remote control or STANDBY/ON on the front of
the Recorder.