VEGA VEGAPULS 68 (≥ 2.0.0 - ≤ 3.8) Foundation Fieldbus - Manual (Page 43)

Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the
following menu items to the reset values (see chart):
3)
Function Reset value
Max. adjustment 0 m(d)
Min. adjustment 15 m(d) (VEGAPULS 67)
70 m(d) (VEGAPULS 68)
Medium Bulk solid
Vessel form not known
Damping 0 s
Linearisation linear
Sensor-TAG Sensor
Displayed value AI-Out
Extended settings None
Unit of measurement m(d)
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Function Reset value
Language no reset
Factory setting
Like basic adjustment, furthermore special parameters are reset to
default values.
4)
Pointer
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
3) Sensor-specific basic adjustment.
4) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Reset
Optional settings
VEGAPULS 68 • Foundation Fieldbus 43
6 Set up with the indicating and adjustment module PLICSCOM
29264
-EN
-090305