VEGA VEGAFLEX 52P (Profibus PA) - Manual (Page 49)

VEGAFLEX 51P and 52P 49
Parameters
5.4 PA parameters
The following parameter listing and the func-
tion diagram are used for setup with the
automation system, if no adjustment software
is available. The listing represents the pa-
rameters of the function block and trans-
ducer block and is only meant for very
experienced Profibus users. Make sure that
all VEGA sensors are profile 3 sensors. Nor-
mally, you will carry out the setup of the sen-
sors with greater ease using the VEGA
adjustment software VVO or the adjustment
module MINICOM in the sensor.
The PA parameters and the function diagram
are generally not necessary for setup.