VEGA VEGAFLEX 52P (Profibus PA) - Manual (Page 32)

32 VEGAFLEX 51P and 52P
Adjustment with PACTware TM 1)
The adjustment with PACTware TM corre-
sponds to VVO adjustment, in this case, VVO
runs as a subprogram of PACTware
TM . The
adjustment instructions can be found in the
documentation of PACTware
TM .
Adjustment with PDM
The sensors can be adjusted completely with
PDM. However, some user-friendly functions
and many special features, like e.g. display
of an echo curve, are not available. In addi-
tion to the PDM software, an EDD (upon
request available from VEGA) is required for
each sensor type. The adjustment instruc-
tions for PDM are described in the PDM
documentation.
Adjustment with the adjustment module
MINICOM
With the adjustment module MINICOM, you
adjust the individual sensor directly on the
sensor or in the external indicating instrument
VEGADIS 50. The adjustment module MINI-
COM enables (with the 6 key adjustment field
with text display) all essential functions of
parameter setting and adjustment.
Setup
4.2 Adjustment with the adjustment
module MINICOM
As with the PC, the sensor can also be ad-
justed with the small detachable adjustment
module MINICOM. The adjustment module is
inserted into the sensor or into the external
indicating instrument (optional).
- + ESC
OK
2
4
Tank 1
m (d)
12.345
- + ESC
OK
Tank 1
m (d)
12.345
4 ... 20 mA
The adjustment module also provides all the
adjustment options available on the PC with
adjustment program VVO. All adjustment
steps can be carried out with 6 keys of the
adjustment module. A small display gives
you, beside the measured value, a short
information on the menu item or the value of a
menu adjustment.
Not possible, however, are parts of the ad-
justment relating to the configuration and
signal processing (e.g. linearisation curve).
This is only possible with the PC.