VEGA VEGABAR 17 - Manual (Page 14)

1
2
3
Fig. 3: Loosen the plug insert
1 Cable gland
2 Plug insert
3 Plug housing
4 R emove approx. 5 cm of the cable mantle, strip approx. 1 cm
insulation from the individual wires
5 L
ead the cable through the cable gland into the plug housing
6 C onnect the wire ends to the screw terminals according to the
wiring plan
2
3
1
4
Fig. 4: Connection to the screw terminals
1 Cable gland
2 Plug housing
3 Plug insert
4 Plug seal
7 S nap the plug insert into the plug housing and insert the sensor
seal
8 P lug the plug insert with seal to VEGABAR 17 and tighten the
screw
T
he electrical connection is finished.
P roceed as follows:
Connection via angle
plug connector with hin-
ged cover
14 VEGABAR 17
5 C onnecting to power supply
27636
-EN
-120531