VTech CS6124_-2-31 (without CHARGE LED) Manual - Manual (Page 18)

Telephone settings
14
Key tone
You can turn the key tone on or off.
Press MENU when the handset is not in use.
Press or until the screen displays Settings, then
press SELECT.
Press or until the screen displays Key tone, then
press SELECT.
Press or to choose On or Off, then press SELECT to
confirm your selection. You hear a confirmation tone.
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If
you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. However, the year must be correct so that the day of the
week can be calculated from the caller ID information.
To set the date and time manually:
Press MENU when the handset is not in use.
Press or until the screen displays Set date/time, then
press SELECT.
When the month is flashing, press or until the screen
displays the correct month and then press SELECT, or use the
dialing keys ( 0-9) to enter the current month (for example, if the
month is March, you must enter 03).
Repeat Step 3 to set the correct date and year and then press
SELECT to advance to set the time.
When the hour is flashing, press or until the screen
displays the correct hour and then press SELECT, or use the
dialing keys ( 0-9) to enter the current hour (for example, if the time is
two o’clock, you must enter 02).
Repeat Step 5 to set the correct minute.
When
AM or PM is flashing, press or to select AM or PM. Press SELECT to
save your settings. You hear a confirmation tone.
If the date and time are not set when a message is recorded, the system
announces, “Time and date not set,” before each message plays.
When there is a power failure or after battery replacement, the date and time need
to be reset.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
•
•
Set date/time
Date: 03 /25/10
Time: 02:35 PM
Key tone
On
Settings