VTech DS6522-3-32-4 Manual - Manual (Page 56)

52
Answering system settings
Remote access code
A two-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can set the code from
00 to 99.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then
press SELECT.
Press or to scroll to Ans sys setup, then
press SELECT.
Press or to scroll to Remote code, then press SELECT.
Use the dialing keys to enter a two-digit number.
-OR-
Press or to scroll to a desired two-digit number.
Press
SELECT to save and you hear a confirmation tone.
Message alert tone
When the message alert tone is set to on, and there is at least one new
message, the telephone base beeps every 10 seconds. The message alert tone
is preset to off.
There is no audible alert at the handset.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then
press SELECT.
Press or to scroll to Ans sys setup, then
press SELECT.
Press or to scroll to Msg alert tone, then
press SELECT.
Press or to choose Tone: On or Tone: Off.
Press SELECT to save and you hear a confirmation tone.
The answering system must be turned on for message alert tone to be functional.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Remote code
ECO
ANS ON
Remote code
19
ECO
ANS ON
Msg alert tone
ECO
ANS ON
Tone: Off
ECO
ANS ON