VTech DS6522-3-32-4 Manual - Manual (Page 20)

16
Bluetooth
Auto connection
A cell phone may be disconnected from the telephone base when:
The Bluetooth feature of your connected cell phone is turned off.
The power of your cell phone is turned off.
Your cell phone is not within range of the telephone base.
When the Bluetooth feature or power on the cell phone is turned on, or it moves
within range of the base, the base will try to reconnect to the cell phone. If you
disconnect the cell phone from the cell devices list, the base will not attempt to
reconnect unless your cell phone is moved out of range and back in range again.
Connect a paired cell phone
If you need to connect your paired cell phone to the telephone base manually:
Press 1/ 2 on the telephone base when it is not in
use. The 1/ 2 light blinks.
When the cell phone is connected to the telephone
base, you hear two beeps. The corresponding status
icon ( 1 /
2
) displays. The corresponding device light
( 1/ 2) turns on.
Disconnect a paired cell phone
If you need to disconnect a paired cell phone from the telephone base, refer to your
cell phone user’s manual for instructions to disconnect a Bluetooth device.
If you press and hold
1/ 2 on the telephone base, the existing paired cell phone
in that slot will be erased. See Add a cell phone (page 15) on how to pair and
connect a new cell phone.
Review the cell devices list
Press MENU on the handset when it is not in use.
Press or to highlight Bluetooth, then press SELECT.
Press or to highlight Cell devices, then press SELECT.
•
•
•
1.
2.
1.
2.
3.