VTech DS6522-3-32-4 Manual - Manual (Page 19)

15
Bluetooth
Bluetooth setup
To use a Bluetooth enabled cell phone with your DS6520/DS6521/DS6522, you
must first pair and connect it with the telephone base. All DS6520/DS6521/DS6522
handsets can be used to make or answer on the cell phone line.
Bluetooth wireless technology operates within a short range (30 feet). When you
pair a Bluetooth cell phone to the telephone base, move closer to the telephone
base to maintain sufficient signal strength. For optimal performance, keep your cell
phone within 15 feet of the telephone base while using the cell line.
Add a cell phone
Before you begin, make sure that you have cellular coverage and your Bluetooth
enabled cell phone is not connected to any other Bluetooth devices. Refer to your
cell phone user's manual to learn how to search for or add new Bluetooth devices.
All paired cell phones are shown on the cell devices list.
Once you have paired and connected a device with the telephone base, you do not
need to repeat the procedure again unless you want to replace the existing paired
cell phone with a new one.
To pair and connect a cell phone:
Press and hold 1/ 2 on the telephone base for about
four seconds. You hear two beeps and the 1/ 2
light blinks.
If there is already a cell phone in the slot, the existing
cell phone will be erased from cell devices list.
Turn on the Bluetooth feature of your cell phone. Once your cell phone finds
your VTech phone ( VTech DS6520/VTech DS6521/ VTech DS6522), press the
appropriate key on your cell phone to continue the pairing process.
Your cell phone may prompt you to enter the PIN of the telephone base. The
default PIN of the telephone base is 0000.
All cell phones that are connected to the telephone base are disconnected
temporarily until the pairing process is completed.
When the cell phone is successfully paired and connected to
the telephone base, you hear two beeps. The corresponding
status icon ( 1 /
2
) displays. The corresponding device light
( 1/ 2) turns on.
If you have trouble pairing your cell phone, it may not be compatible with
your DS6520/DS6521/DS6522. Check the Bluetooth compatibility list at
www.vtechphones.com.
The pairing process may take up to one minute. If the pairing process fails,
try again.
The steps for the pairing process may vary for different cell phones. If this
happens, follow the prompts on your cell phone and your DS6520/DS6521/
DS6522 to complete the pairing process.
1.
•
2.
•
•
3.
•
•
HANDSET 1
10:01 AM 01/02
ECO
ANS ON
1
2