VTech DS6522-3-32-4 Manual - Manual (Page 54)

50
Answering system settings
Delete your announcement
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then
press SELECT.
Press SELECT again to choose Announcement. The system
announces, “ To play, press 2. To record, press 7.”
Press 3 to delete your recorded announcement. The handset
displays Annc deleted and then the system announces,
“Announcement deleted.” You hear a confirmation tone.
When your announcement is deleted, calls are answered with
the preset announcement.
Answer on/off
The answering system must be turned on to answer and record messages. When
the answering system is turned on, the /ANS ON/OFF light on the telephone base
turns on and ANS ON displays on the handset.
To turn on or off at the telephone base:
Press
/ANS ON/OFF to turn the answering system on or off.
If the answering system is turned on, the telephone base
announces, “ Calls will be answered.” If the answering system
is turned off, the telephone base announces, “ Calls will not
be answered.”
To turn on or off with a handset:
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then
press SELECT.
Press or to scroll to Answer on/off, then
press SELECT.
Press or to scroll to Answer: On or Answer: Off, then
press SELECT to confirm. You hear a confirmation tone.
When you turn on the answering system at the telephone base
with no memory capacity left, Memory full displays on the
handset. The answering system announces, “ Memory is full.”
If the remaining recording time is less than three minutes, the
telephone announces, “ Less than three minutes to record.” and
the handset displays Rec mem low.
1.
2.
3.
4.
1.
2.
3.
4.
•
•
Play Del Rec
[2] [3] [7]
ECO
ANS ON
Answering sys
ECO
Answer on/off
ECO
Answer: On
ECO
Annc deleted
ECO