V-Tech SC6M Manual - Manual (Page 6)

LED Indicator Description
RUN Blink
LIGHT Light on when setting the time for light
MEMORY Light on when formating the SC6M memory
CAMERA Light on when restore to default
BUTTON Description
PROG Press to quit program mode
TURN ON
Press to set the time for light
In program mode,press TURN ON button, the LIGHT
indicator will blink, timing is starting, press the TURN ON
button again to confirm the time of light on.
PLAY
Press to format the SC6M memory
In program mode,press PLAY button, the MEMORY
indicator will blink, formatting is starting, press the PLAY
button again to confirm the operation.
SWITCH
Press to restore to default
In program mode,press SWITCH button, the CAMERA
indicator will blink, restore to default is starting, press the
SWITCH button again to confirm the operation.
Specification
Warning
Power Supply: DC24V(supply by PC6)
Power Consumption: standby:10mA;working:70mA
Working Temperature: -5 0 C ~+45 0 C
Dimension: 90(H)X72(W)X60(D)mm
- The unit can only be used in DT 2 wire products supplied by our company.
- Don’t connect the unit with any non-specified power source. Fire or electric
shock could result.
- Don’t dismantle or alter the unit. Fire or electric shock could result.
- The unit must be installed and wired by a qualified technician.
- Keep the unit away from water or any other liquid. Fire or electric shock could
result.
-5-