V-Tech VT-QSW Manual User Manual
Introduction 2. terminal descriptions, Power supply input port, 2p terminal,cctv camera1 connection port
VT-QSW User Manual
2011/09/30 Version 1.0
1. Introduction
2. Terminal Descriptions
The VT-QSW module is designed to
VT system for the purpose of video quad
splitter,four images from 4 different
cameras can be displayed on screen of
monitor via QSW unit. Note that the
VT-QSW is for VT27 series monitors
application only.
IN-USE:
Status indicator,it will light up or blink when receives signal.
POWER:
Working indicator,it will light up when plug in power supply.
DC:
Power supply input port.
SETUP:
DIP switches,refer to table 1 for detail information.
VD1:
2P terminal,CCTV camera1 connection port.
VD2:
2P terminal,CCTV camera2 connection port.
VD3:
2P terminal,CCTV camera3 connection port.
JS-OS:
Input port,connect to door station.(if multi door stations are
installed,connectd to MDS)
JS-VP:
Output port,connect to indoor monitors.
JS-VP(OUT)
DC
SETUP
JS-OS(IN) VD3 VD2 VD1
1 2 3 4
ON
DIP
QSW
POWER
LED Indicator
IN-USE
-1-