V-Tech SC6M Manual - Manual (Page 4)

Note:
1.the SC6M must connect together with PC6 to achieve these functions.
2. one unit system just need one SC6M only.
3. if the system connect SC6M, the picture memory function and calendar will
be activated immediately.
4. if the switch is open, the light will be always on. if the switch is close, the light
is controlled by the monitor.
Picture Memory
• The monitor of the system must support picture memory function.
• Max.800 pictures is supported in SC6M.
• The monitor support both auto record and manual record.
• The recorded pictures can not be deleted on monitor, When the built-in
memory is full,the oldest picture will be deleted to make room for new record .
• The recorded pictures can be played on monitor directly when the system
is not in busy. If the system receives calls, the playback will be interrupted
immediately.
• For the apartment system,each unit can only preview the recorded pictures of
their own user code.
Configuration
RUN
LED BUTTON
LIGHT
MEM CAM
PROG TURNON
PLAY SWITCH
-3-