Veris Technologies Precision Rate Controller - Operation Manual - Manual (Page 5)

Pub.# OM17-PRC
1-3
Console Functions
Shown below in Figure 3 is the Precision Population Controller Console. The
uses of each key are as follows:
Figure 3. Console Set to Main Operating Screen, in manual mode
On/VR key —turns
drive system on.
Press twice for VR
mode. Note:
Engage key must
also be pressed to
start drive
operation.
Function
key: used in
calibration
mode and to
program
Console for
VR recipes. Up/down arrow
keys: used to
change rates
manually, to set
calibration
numbers, and VR
controller options. Engage key:
press to start
drive. Note: drive
will not run
unless light
above key is
illuminated Off key:
used to
shut off
Console.