Veris Technologies Precision Rate Controller - Operation Manual - Manual (Page 2)

Pub.# OM17-PRC
Table of Contents
Operational Requirements
—Hydraulic and Electrical
1-1
Tractor Hookup 1-2
Console Functions 1-3
Rate Calibration 2-1
Speed Calibration 3-1
Operations 4-1
Varying Rates with Pre-set Function 5-1
Varying Rates with GPS-based maps 6-1
Maintenance 7-1
Troubleshooting 8-1
Important Information
!
WARNING !
Return all hydraulic valves to neutral position before
exiting tractor cab. Inadvertent drive rotation could
cause serious injury.
WARNING!
Escaping fluid under pressure can have sufficient
pressure to penetrate the skin. Check all hydraulic
lines and fittings before applying pressure. Fluid
escaping from a very small hole can be almost
invisible. Use paper or cardboard, not body parts,
and wear heavy gloves to check for suspected leaks.
If injured, seek medical assistance from a doctor that
is familiar with this type of injury. Foreign fluids in the
tissue must be surgically removed within a few hours
or gangrene will result.
NOTICE !
Do not weld on drill unless electronic components
are removed.