Velleman VMB4PD - Manual (Page 32)

VMB4PD 32
Using the VMBIRTS IR Remote Stick
All 8 commands can directly be activated using the IR remote stick.
Point the IR remote stick towards the push button module and activate the desired channel on the stick
(see the VMBIRTS manual).
Activating commands 1 through 4 on the stick will make the module display the corresponding labels.
Activating commands 5 through 8 on the stick will make the module display the corresponding labels.
The module will automatically return to the default set of commands after 15 seconds of inactivity.
Remark:
• The module will not switch to the corresponding labels if the current is displayed.
• Make sure to synchronize the IR transmitter/receiver by setting the correct address. Refer to
“Addressing” and the transmitter user manual.