Velleman VMB4PD - Manual (Page 16)

VMB4PD 16
Modifying the Labels
It is possible to label all commands so as to explain their function.
1. Hold the configuration button pressed for 4 seconds to display the configuration menu.
2. Press the configuration button again to display the configuration menu.
3. Press the lower right button to display the label editor.
4. Move the cursor to the left or to the right using the two upper push buttons.
Select the character using the two lower push buttons.
Press the configuration button to display the second set of commands (commands 5 to 8).
Configuration button
Next configuration menu
Label editor
Quit configuration menu
Cursor to the left Cursor to the right
Select character Select character
Display second set of commands