Velleman VMB6PBN User Manual
Page 3
VMB6PBN – ed.1 |Push-button interface
3
DESCRIPTION
With this pushbutton interface it is possible to use 6-gang or 4-gang pushbuttons with LED indicators from Niko
®
from
in your Velbus installation.
CHARACTERISTICS
Use:
• Suitable for Niko® 6-gang pushbutton with amber LEDs (Niko® ref. 170-60100)
• Suitable for Niko® 6- gang pushbutton with blue LEDs (Niko® ref. 170-60110)
• Suitable for Niko® 4- gang pushbutton with amber LEDs (Niko® ref. 170-40100)
• Suitable for Niko® 4- gang pushbutton with blue LEDs (Niko® ref. 170-40110)
LED indications:
• Backlighting of the buttons:
o
Switchable, on or off
o
Brightness
adjustable
• Feedback on the buttons
o
Switchable, on or off
o
Flashing mode on or off
o
Status feedback of a contact (open or closed)
• Presence of input voltage
• Sending or receiving data over the Velbus
Configuration:
• Only configurable via a Velbus pc interface (VMB1USB, VMB1RS or VMBRSUSB) and the Velbuslink software
• Software addressing (up to 250 addresses possible)
• Pushbutton settings:
o
Response time for each pushbutton adjustable between 0, 1, 2 or 3 seconds
o
Normally open or normally closed type
o
Double-channel pushbutton (short or long push)
o
Multichannel pushbutton (each push selects the next channel
o
Lock or unlock
o
suppress
• Switching times
o
To simulate a pushbutton operation at a certain time
o
Daily, weekly, monthly or yearly program
o
Choose between summer, winter or holiday program
o
Pushbutton lock and unlock can be added to the program
o
Two different wake-up and bed times that can be used as references in the program
o
Sunset/sunrise linked programs
o
Switching programs can be enabled and disabled per pushbutton.
• Functions via external Velbus pushbuttons
o
Lock or unlock
o
Activate/deactivate
switching
programs
o
Activate/deactivate wake-up and bed time related programs
o
Activate/deactivate sunrise related programs
o
Activate/deactivate sunset related programs
o
Choose between summer, winter or holiday or no program
• Sunrise and sunset times are adjustable
• Configuration settings are preserved during power cuts
Power supply module:
• Required operating voltage: 12...18Vdc
• Consumption when idle: 17mA
• Maximum consumption (all LEDs on): 25mA
Dimensions:
• width x height x depth: 40x30x14mm