Velleman VMB6PBN - Manual (Page 12)

12 Push-button interface| VMB6PBN – ed.1
The deactivation time can be permanent or set between:
o 1 sec and 2 min, in steps of 1 sec
o 2 min and 5 min, in steps of 15 sec
o 5 min and 30 min, in steps of 30 sec
o 30 min and 1 hour, in steps of 1 min
o 1 hour and 5 hours, in steps of 15 min
o 5 hours and 10 hours, in steps of 30 min
o 10 hours and 24 hours, in steps of 1 hour
o 2 or 3 days
• Activate the switching program for a pushbutton through a push on another Velbus pushbuttons.
Selection switching program:
There are 3 different program groups to choose from: summer, winter or holiday program. This can be done via the
VelbusLink software or via other pushbuttons that are connected to the Velbus system.Only the program steps that
belong to the program group are executed. If no program group is selected, no program steps will be executed.
Alarm:
In the switching program it is possible to use two different wake-up times and two different sleep-times.
Setup is done via the VelbusLink software:
• Wake-up time in hours and minutes.
• Sleep-time in hours and minutes.
• Wake-up and sleep-times can be locally or global:
o Locally means the setting only applies to the selected module.
o Global means applicable for all modules that are set to ‘global’.
• The wake-up and sleep-times can be enabled or disabled:
o Enabled means that all program steps that use wake-up or sleep-times are executed.
o Disabled means that all program steps that use wake-up or sleep-times are not executed.
Activating/deactivating the alarm clock:
Programs that use wake-up or sleep-times can be activated or deactivated. This can be done through the Velbus
software or via pushbuttons connected to the Velbus.
Following options are available:
• Execute wake-up/sleep-time related programs as long as a Velbus pushbutton is closed.
• Execute wake-up/sleep-time related programs as long as a Velbus pushbutton is open.
• Do not execute wake-up/sleep-time related programs as long as a Velbus pushbutton is closed.
• Do not execute wake-up/sleep-time related programs as long as a Velbus pushbutton is open.
• Activate wake-up/sleep-time related programs via a push on a Velbus pushbutton.
• Activate/deactivate
wake-up/sleep-time related programs via a push on a Velbus pushbutton.
• Deactivate wake-up/sleep-time related programs via a push on a Velbus pushbutton.
Sunrise and sunset:
The switching program allows the use of the time of sunrise and sunset.
Setting is done through the VelbusLink software:
• Timetable for sunrise and sunset
• Activate or deactivate sunrise related programs
• Activate or deactivate sunset related programs
Activating/deactivating sunrise and sunset related programs:
Programs that use sunrise or sunset times can be activated or deactivated. This can be done through the Velbus
software or via pushbuttons connected to the Velbus.
Following options are available:
• Execute sunrise/sunset time related programs as long as a Velbus pushbutton is closed.
• Execute sunrise/sunset time related programs as long as a Velbus pushbutton is open.
• Do not execute sunrise/sunset time related programs as long as a Velbus pushbutton is closed.
• Do not execute sunrise/sunset time related programs as long as a Velbus pushbutton is open.
• Activate sunrise/sunset time related programs via a push on a Velbus pushbutton.
• Activate/deactivate sunrise/sunset time related programs via a push on a Velbus pushbutton.
• Deactivate sunrise/sunset time related programs via a push on a Velbus pushbutton.