TROY Group Digital Image User's Guide for HP Printers - Manual (Page 4)

Digital Image User's Guide for HP Printers
Document #50-70297-001 Rev. G Page 4 of 6
Installing the TROY Digital Image Printer Fonts for Windows
™
2000 / XP / Server 2003
1. Close all applications before installing the TROY Digital Image support files.
2. Insert the TROY CD/floppy into your computer's CD-ROM/floppy drive. NOTE: If the support files
were sent by email or downloaded from the website, extract the support
files to a temporary folder and make a note of the location. When reference is made to access these
files, navigate to the folder that contains the extracted support files.
3. From the Microsoft Windows Start menu, click on Settings, and then click on Printers.
4. Right-click on your printer icon, and then click on Properties from the pull-down menu. If multiple
printers are installed, make sure the correct printer icon is selected. Remember that the printer selected
must be the PCL 5e language driver, not Postscript or other printer language.
5. Click on the Device Settings tab located at the top of the Properties window.
6. Click on External Font (under the Font Substitution Table category), and then click on the Properties
button.
7. Click on the Browse button to open the drive selection window. Double-click on the appropriate drive
letter to select the CD-ROM/floppy drive on your computer. From the root folder, double-click on the
Support Files folder from the list of folders, double-click on the PCM Files folder, and then double-
click on the Imaging folder.
8. Refer to the TROY Digital Image Data Sheet for the selection labeled Windows Support Information
and note the Font Metrics section, which displays the Windows support file and point size (9, 12, or 72)
for your TROY Digital Image(s).
9. Double-click on the appropriate folder: Image (9 points), Image (12 points), or Image (72 points), and
then click on the file in that folder (example: 72201210.pcm), and then click on ADD to add the digital
images. Windows can support up to ten digital images. If the Font Metrics section of the TROY Digital
Image Data Sheet does not have a file name listed but states "Custom Metrics Required”, contact the
TROY Digital Imaging Department for information on obtaining Windows support files for special
orders.
10. Close all remaining open windows.