TROY Group Hewlett-Packard 9050 Font Memory Card Kit Quick-Start Guide - Manual (Page 11)

Font Memory Card Kits
Quick-Start Guide
Document #50-70408-001 Rev. A
Page 11 of 11
Update the HP Printer Firmware
1. Using an Internet connection (broadband connection recommended), open a web browser (e.g., Internet
Explorer or Netscape Navigator), type in < http://www.hp.com > in the address bar, and then press Enter.
The HP home page should appear on your screen momentarily.
NOTE: The HP links and/or link names described in the following steps are subject to change without notice.
2. From the HP home page, click on Support and Drivers from the menu items listed on the right-hand side of
the screen, click on Printing and Multifunction from the ‘Select a product category’ section, and then click
on Printers from the ‘Select your product’ section.
3. From the Printers page, click on HP LaserJet Printers from the ‘Select your product’ section, and then
select the printer series that corresponds to your HP printer (i.e., select HP LaserJet 2000 Printer Series if
you own an HP 2430 printer).
4. Click on the printer model that matches your HP printer model (e.g., HP LaserJet 2400 Printer Series) from
the ‘Select your product’ section.
5. Click on Download drivers and software from the ‘I would like to’ section, and then click on the printer
model that exactly matches your HP printer model (e.g., HP LaserJet 2430tn Printer) from the ‘Select your
product’ section.
6. Click on Cross operating system (BIOS, Firmware, Diagnostics, etc.) from the ‘Select operating system’
section.
7. Click on the download ! button that corresponds to the operating system installed on your computer (i.e.,
Windows, Macintosh, or Unix). When the file download screen appears, click on Save, select the folder
your wish to save the file to, and then click on OK to start the download process. Depending on the speed of
your Internet connection, the download may take several minutes to complete. When the download is
complete, click on Close.
8. Follow the directions in the corresponding README.TXT file provided on the web page for installing the
new firmware file.