Soft dB Smart Piezo Drive User Guide - Manual (Page 9)

Smart Piezo Drive - User’s Manual 9
Figure 4 Drift correction dialog box
Each drift correction value is scaled by the Sensitivity value that is set for the corresponding
channel.
With the USB version of the interface, a oscilloscope function can be used to monitor the output
signals in real time. The sampling frequency is 75 kHz and the memory length is 60 s. The next
figure presents the oscilloscope window (launched by the Scope button of the main interface):
Figure 5 Oscilloscope window
The user can pause the acquisition at anytime and use the zoom functionalities on the time
signals. The oscilloscope is stopped when the function window is closed.