Soft dB Opus Suite SLM 4-Ch Module - Manual (Page 62)

59
Power on/off
Turn On
Press the trigger button located at the back of the unit
This key has two (2) functions:
1. To turn the unit ON.
2. Start a measurement once the SLM Module is loaded
After a few seconds, the Opus Environment Interface will appear.
Stand-by
The stand-by mode allows fast load time.
• To put the unit on stand-by, click the Turn Off button.
Note: The unit can be in stand-by for more than three days without recharging,
provided batteries are fully charged prior to storage.
Shutdown
To Shut down the unit, click and hold the Turn Off button for five seconds.
Power-on Turn Off