Soft dB Opus Suite SLM 4-Ch Module - Manual (Page 31)

28
7.2.6 Camera display
The camera display can be used to display the life video captured by a webcam. The camera settings
can be adjusted from the Photo Setup within the Record Setup interface (section 0, p.48). The
software manages up to 4 cameras (acquires one at once). However, no more than one camera
should be use on a Concerto unit to ensure realtime acquisition.
Camera buttons
Indicates that the camera is being displayed.
Indicates that the picture is being taken and recorded.
Indicates that the camera is detected, but another camera is being
displayed.
Indicates that the camera is not detected, but it is enabled in the
Photo Setup.