Ohaus RA PRICE COMPUTING COMPACT SCALES Manual - Manual (Page 9)

RA Series EN-7
4.7 PLU Function (Price Lookup)
The PLU function can be used for frequently sold goods. The price is looked
up by simply entering the PLU number via the numeric keypad. The PLU
function can store up to 25 PLU’s.
4.7.1 Storing a PLU
1. Enter the Unit Price
2. Press and hold [PLU] until 2 beeps are heard (the Weight display shows
“ PLu ”)
3. Enter the PLU number (1-25). The scale beeps twice again, indicating
that the PLU data was stored.
4.7.2 Recalling a PLU
Press [PLU], then the PLU number with pre-stored data. The scale will beep
once as the corresponding Unit Price is shown in the Unit Price display. If
entering a PLU number with no stored data, “
noPLu ” will show momentarily
in the Weight display.
4.8 By-Count Function
The By-Count function is used as reference to calculate the price of non-
weighing items, e.g., the price for 36 pieces when 3 pieces cost a total of
$1.50.
1. Enter the deal quantity (1-99), e.g., “
3 ” (displayed as “0.03 ” in the Unit
Price display), then press [X]. The X annunciator will also be on to
indicate the scale is in the By-Count mode.
2. Enter the deal price, e.g., “ 1.50 ”, then press [+]. The Total Price display
will show “ 1.50 ”.
3. Enter the quantity to be sold, e.g., “ 36 ”. The resulting total price of
“ 18.00 ” is shown in the Total Price display. Keep entering another
quantity as needed.
4. To end the By-Count function and return to normal weighing mode, press
[C].