Ohaus RA PRICE COMPUTING COMPACT SCALES Manual - Manual (Page 10)

EN-8 RA Series
4.9 Accumulation (Totalize) Function
The Accumulation (totalize) function is used to add the total price of several
weighings.
4.9.1 Accumulating
1. Perform a pricing transaction as described in Section 4.6. (entering a
unit price via the numeric keypad, or recall a pre-stored PLU per Section
4.7.2)
2. Press [+]. The displayed total price is added to the accumulation
memory, and the ADD and TOTAL annunciators will be on.
3. The Weight display will show “ Total ”, the Unit Price display will show “1”
(the number of weighments), and the Total Price display will show the
accumulated total price value.
4. Remove the item, then repeat steps 1 and 2 until all desired transactions
are finished. The corresponding total number of weighments and
accumulated price will be displayed.
5. Press [0] to temporarily exit the Accumulation function and display
(described in step 3). Stored accumulated data is still retained until
cleared.
4.9.2 Recalling and Clearing Accumulation
With the pan empty, press [+]. The accumulated total number of
weighments and total price will be displayed. To clear accumulation
memory, press [C] at this time. The scale returns to normal weighing mode
and the ADD annunciator will turn off.
4.10 Backlight Feature
With the scale on, long-press [C] until the backlight turns on (repeat this step
to turn off, or when the scale is turned off and on again). When on, the
backlight temporarily switches off after 2 minutes of inactivity, and reactivates
with a key pressed or item placed on the pan.
4.11 Battery Power Saving Feature
When powered on batteries (not included), the scale will enter sleep mode
(Weight display will only show one “
0 ” digit, and Unit Price and Total Price
displays will be blank) after 2 minutes of inactivity. It reactivates when a key
is pressed or an item placed on the pan.