Hotchkis 22435R MX5 Rear Sport Sway Bar - Manual (Page 7)

3R
Undo the Sway Bar Bushing Bracket Bolts
Loosen and remove the sway bar bushing bracket bolts. There are 2 per bracket. Once the
bolts are removed, the bar should be loose from the vehicle.
4R
Reinstall New Hotchkis Bar
Repeat steps 1R through 3R in reverse order. Your new Hotchkis bar uses new bushings and
brackets. Your kit comes with flat cut washers for the bushing bracket nuts. Install these
washers before you install the OEM nuts. Use the supplied silicon grease to lube the inside
surface of the bushings. Make sure to use thread lock compound on the subframe bushing
bracket bolts and the end link nuts. You can adjust the stiffness of the rear sway bar based
on which end link hole you use. The hole closest to the end of the bar is the softer setting
and the hole furthest from the end is the stiffest setting.