Hotchkis 2280 CTS-V Sport Sway Bars User Manual
Installation of hotchkis front sway bar
Anti-Roll Bar Set # 2279, 2280
2003+ Cadillac CTS V6 & CTS-V
Thank you for your purchase from our new line of CTS parts.
Please call us at (877) 4NO-ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
Visit us online @
Tools & Supplies Required for this Installation
- Hydraulic jack, jack stands, floor ramps(4 post lift or alignment rack preferable)
- 2 pry bars, Loctite, torque wrench
- The following sockets or wrenches: 10mm, 13mm, 15mm, 18mm, and 21mm
INSTALLATION OF HOTCHKIS FRONT SWAY BAR
»
Secure the rear with blocks and raise the front of the vehicle. Place jack stands at the factory jack
points. Remove front wheels.
Table of contents
Document Outline
- Anti-Roll Bar Set # 2279, 2280
- Anti-Roll Bar Set # 2279, 2280
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?